RussianEnglish
 » Products » Equipment for polishing of optical components

Polishing machine model P-10

The machine is designed for polishing spherical surfaces of optical components. Processing is carried out by the method of lapping.

Technical characteristics

Diameter of the machined parts (blocks), mm from 1 to 11
Quantity of spindles, pcs 3
Diameter of the anchorage of the optical part, mm, no more 15
Spindle rotational speed, rev/min from 250 to 2500
Frequency of oscillation of the leash, double strokes/min from 20 to 100
Swing angle of the leash, deg from 0 to ±45
Offset angle of leash, deg от 0 до ±45
Installed power, kW, not more 2,0
Overall dimensions, mm: L x W x H 825х745х1250
Weight, kg, no more 220

Polishing-finishing machine model PD-500A

Designed for fine sanding, polishing and finishing of spherical and flat surfaces of optical parts or blocks by the method of lapping with free abrasive.

Technical characteristics

Diameter of processed optical parts and blocks, mm from 300 to 500
Parameter roughness Ra of the workpiece surface, µm from 0,012 to 0,4
Productivity, pieces/hour from 0,2 to 5
Installed power, kW, not more 2,27
Overall dimensions, mm: L x W x H 1400х1000х1500
Weight, kg 1100

Spindle rotational speed and frequency of oscillation are regulated infinitely leash.

Polishing-finishing machine model 6PD-100M

Designed for polishing and finishing of spherical and flat surfaces of optical parts or blocks by the method of lapping with free abrasive.

Technical characteristics

Diameter of processed optical parts and blocks, mm from 25 to 100
Quantity of spindles, pcs 6
Spindle rotational speed (is adjusted steplessly), rpm from 10 to 100
Number of double strokes per minute leash (is adjusted steplessly), rpm from 7 to 70
Effort of pressure, N from 2,45 to 98
Length of the stroke, mm from 0 to 130
Power consumption of motor drives, kW, not more 4,0
Overall dimensions, mm: L x W x H 2650х900х1300
Weight, kg, no more 1300

Polishing machine model MAP-300

Designed for polishing of flat surfaces of optical parts ferro-abrasive powder under magnetic field.

Technical characteristics

Diameter of processed optical parts, mm from 25 to 300
The thickness of the processed optical parts, mm from 1 to 10
Material of processed opticals details optical glass, single crystals of fluorides, silicon
Parameter roughness Rz of the workpiece of optical part, µm from 5,0 to 1,0
The depth of the defect (disorder) layer of the treated surface, nm from 3 to 0,5
Performance, cycles/hour 3

Machine for finishing model D-150M

Designed for finishing optical components is not more than 150 mm in diameter.

Technical characteristics

Diameter of processed optical parts, mm from 15 to 150
Diameter of the pelvis, internal, mm, not less 265
Spindle rotational speed (is adjusted steplessly), rpm from 15 to 1500
Power of electric motor of the spindle, kW 0,55
Overall dimensions, mm: L x W x H 750х820х920
Weight, kg, no more 150

Up